Civil Engineering

     
 Asphalt Pavement Preservation & Rehabilitation
The objective of this course is to assist an engineer in the development of the most reliable and cost-effective rehabilitation alternatives for asphalt pavements. The abilities of the engineer required to preserve the existing pavement system are much different than those required to originally design the system. They need to have an understanding of what caused the distress they are seeing and what steps can be taken to correct them. The course is broken into two units: pavement management concepts and pavement rehabilitation procedures. The first unit will address pavement management concepts at the project level which will include an overview of pavement management, pavement structural and condition assessment, distress mechanisms for Hot Mix Asphalt and project evaluation. The second unit provides information on pavement rehabilitation through pavement maintenance techniques, surface rehabilitation procedures, recycling of asphalt pavements, and asphalt overlays.
Instructor: Mr. Douglas Hanson
Course # V00B
Format: DVD-R with supporting print materials
Length: 5 hours (0.5 CEUs or 5 PDHs or 5 CPCs)
Fee: Individual $240 / Organization $725
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Concrete Basics: Commercial Slab on Grade
Concrete slabs on grade are integral to almost all commercial construction projects. This course, the second in a series on construction of concrete slabs on grade, examines the construction a high quality commercial slab on grade from the viewpoints of the contractor, the architect, the owner, the concrete subcontractor and the engineer. Using video footage of the construction of a slab on grade for large convention center, the authors examine items such as pre-pour meeting, sub-grade preparation, and placing and finishing operations.
Instructors: Mr. Michael Hein and Mr. Steven Williams
Course # V04E
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $459
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Concrete Basics: Residential Slab on Grade
Concrete slab on grade is the single most common structural element used in the building industry today. This course, first of a series on concrete construction and design, examines the construction of high quality residential slabs on grade from the viewpoints of the contractor and engineer. Videotape and computer modeling are used extensively as an elaborate residential driveway is planned, modeled, constructed and finished. Planning is covered in detail. Various methods of preventing and limiting cracking are examined in depth.
Instructors: Mr. Michael Hein and Mr. Steven Williams
Course # V99P
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $429
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Corrosion Prevention and Control

Following an introduction to the scientific principles used to understand and describe corrosion, the course uses these principles to demonstrate examples of various types of corrosion and present practical methods for minimizing or preventing corrosion. Especially useful to engineers of all types involved with the design, repair and maintenance of structures and equipment.

Instructor: Dr. Jeffrey W. Fergus
Course # V97C
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $369
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Design and Construction of a Concrete Frame Building
This program explores the interaction between engineering design and the techniques of modern construction for a four-story continuous concrete frame hospital. Specific emphasis is placed on the viewpoint of the constructor, along with a pictorial history of the construction of structural components. Among the topics covered are retaining walls, drilled piers and footings, columns, beams, walls, and slabs. In addition to construction issues, an approximate engineering analysis in conjunction with a conceptual review of the structural behavior of each component is presented. Presenters make generous use of physical and digital models to enhance visualization.
Instructors: Mr. Michael Hein and Mr. Steven Williams
Course # V01B
Format: DVD-R with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $899
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Design of Composite Beams Using LRFD
Fundamentals of cross section analysis and design of composite steel and concrete beams using the American Institute of Steel Construction (AISC) Load and Resistance Factor Design (LRFD) Specification for Structural Steel Buildings are covered. The course emphasizes specification requirements and fundamental calculations of moment capacity and cross section rigidity at various levels of composite action. These concepts are essentials for spot checks for design aids and verification of computer program output. A through understanding of fundamentals also generally shortens the design process and leads to more efficient choices of materials and structural configurations. A basic background in structural analysis and design is assumed. Prior training in the use of LRFD is not required.
Instructor: Dr. J. Michael Stallings
Course # V02E
Format: DVD-R with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $899
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Designing Modern Timber Bridges

Timber bridges have been used throughout history. However, with new advances in engineered wood products and preservative treatments, modern timber bridges are still a viable alternative for many highway and off-highway construction applications.

This course begins with a presentation of the different types of timber bridge superstructures in use today. Then, the course quickly reviews the basics of wood as an engineering material and the different types of structural wood products, wood mechanical connections, and preservative treatments. Design procedures for wood construction are also reviewed. The course focuses on the design of two main types of timber bridge superstructures: 1) those composed of longitudinal girders with transverse decks and, 2) those composed of longitudinal decks. The course covers the use of sawn lumber and glued-laminated timbers in both of these main superstructure types. The course concludes with a discussion of issues related to timber bridge inspection, maintenance, and rehabilitation.

We encourage you to obtain a copy of the publication from the USDA Forest Service entitled "Timber Bridges: Design, Construction, Inspection, and Maintenance". Call them at 304-285-1591 or order from their web site, www.fs.fed.us/na/wit/. Order publication 02-0001. If you are unfamiliar with design procedures for wood construction, we encourage you to complete the other courses on Designing with Wood.

Instructor: Dr. Steven E. Taylor 
Course # V01E
Format: DVD-R with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $899
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 
 Designing With Wood - Three Parts
This series, sold in three parts, is designed to offer something for both the engineer with little knowledge of wood design as well as the experienced engineer needing to update their knowledge of wood design procedures. It begins with a coverage of wood as a construction material, an introduction to the design procedures for wood, and coverage of special types of wood structures. The second part of the series focuses on using the National Design Specification for Wood Construction (NDS), which uses the traditional allowable stress design (ASD) format. The series is completed by an in-depth look at the new LRFD procedures for wood design. Extensive design examples will be covered for both the ASD and LRFD sections. We encourage you to obtain a copy of the NDS or the LRFD Manual for Engineered Wood Construction from the American Forest and Paper Association prior to viewing the tapes. Call 800-890-7732 for ordering information.
Instructor: Dr. Steven E. Taylor 


 Part One - The Basics of Designing with Wood
Introduction: overview of course and examples of different wood structures. Wood as an Engineering Material: engineering characteristics of solid wood products, structural composite lumber, and panel products. Intro to Wood Design: review of current design formats - ASD and LRFD. Special topics: specifying and using metal-plate connected trusses, timber bridges, and post-frame buildings.
Course # V99A
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $429
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.


 Part Two - Allowable Stress Design for Wood Construction
NOTE: This course does not cover the 2001 and 2005 National Design Specification for Wood Construction.
Overview of 1997 Edition of the NDS and its Supplement.
Design Procedures for Components: fundamentals, design of members in tension, compression, bending, combined stress, and bearing. Component Design Examples. Design Procedures for Connections: fundamentals, bolts, lag screws, nails, wood screws, and other connectors. Connection Design Examples.
Course # V99B
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $119 / Organization $429
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.


 Part Three - Load and Resistance Factor Design for Wood Construction
Overview of 1996 Edition of the LRFD Manual for Engineered Wood Construction and its Supplements. Design Procedures for Components: fundamentals, design of members in tension, compression, bending, bending and axial stress, and bearing. Component Design Examples. Design Procedures for Connections: fundamentals, bolts, lag screws, nails, wood screws, etc. Connection Design Examples. Structural Panel Design Procedures: shear walls and diaphragm design procedures.
Course # V99C
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $429
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Erosion Control Using Geosynthetics
Become more environmentally aware! Learn how to reduce surface water pollution from soil runoff by using geosynthetics. This course will introduce you to the history and applications of geosynthetics. You will also be exposed to factors influencing erosion such as rainfall, soil type and vegetation. Surface stream bank and coastal erosion control measures using geosynthetics also are covered.
Instructor: Dr. David J. Elton
Course # V96M
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $369
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Hot Mix Asphalt Mix Design
A discussion of the new Superpave mix design method is provided. Topics covered include: Historic development of Asphalt Grading Systems; Superpave Binder tests; Superpave Binder grading and specifications; Physical properties of aggregates; Superpave Aggregate gradation specifications; History of mix design; Hot mix asphalt volumetric properties; Superpave mix design: Gyratory Compaction; and Superpave mix design: Selection of Optimum AC content.
Instructors: Dr. Ray Brown, Mr. Douglas Hanson, Mr. Ken Kandhal, and Dr. Mary Stroup-Gardiner
Course # V98H
Format: DVD-R with supporting print materials
Length: 10 hours (1.0 CEUs or 10 PDHs or 10 CPCs)
Fee: Individual $480 / Organization $1,199
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Hot Mix Asphalt Pavement Construction
Information is provided on plant production, placement, and compaction of Hot Mix Asphalt. Construction methods, specifications, and quality control procedures are discussed. Topics covered include: plant operation; placement and compaction; statistical specifications; and Quality Control / Quality Assurance testing.
Instructor: Dr. Ray Brown
Course #V98G
Format: DVD-R with supporting print materials
Length: 5 hours (0.5 CEUs or 5 PDHs or 5 CPCs)
Fee: Individual $240 / Organization $579
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
Landfill: Basics of Design and Operation 

This 6 hour course covers the technical issues of siting, designing, operating and closing municipal solid waste landfills. Elements of geosynthetics design for landfill lining systems, drainage systems, and covers are reviewed along with the environmental regulations that dictate much of this practice.

The Civil Engineering profession is heavily involved in environmental issues, including solid waste disposal in municipal solid waste (MSW) landfills. MSW accounts for about 50% of the billable hours in geotechnical engineering consulting practice.

Increasing training and awareness is needed to prepare the nation to adequately and safely deal with society's waste products. While recycling accounts for an ever-increasing amount of waste recovery, landfilling remains the premier method of disposing of waste.

Dr. David Elton teaches. He teaches Landfill Design at Auburn University and developed notes for the National Science Foundation on Landfills, used by teachers around the nation.

Course # V04L
Instructor: Dr. David Elton
Format: DVD-R  with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $918
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
Reinforced Concrete Design: Part 1 - Flexural Members
Fundamentals of design of reinforced concrete flexural members are covered. Focus is on design by the American Concrete Institute's Building Code Requirements for Structural Concrete 318-02 (ACI 318-02). Fundamental behavior of flexural members and the necessary design checks are presented. New code requirements related to load factors and combinations are described along with the new requirements for the use of net tensile strain in checking ductility and determining the resistance factor for flexure. Examples of analysis and design of beams and one-way slabs are used to illustrate the concepts. A fundamental background in structural analysis and design is assumed. This course is designed for engineers seeking a review of basic principles of reinforced concrete design. Engineers who only occasionally design miscellaneous flexural members will find the course of particular value. Topics include materials, loads and load combinations, flexure of singly reinforced cross sections, T-beams, beams with compression reinforcement, shear, one-way slabs, and anchorage and development of tension reinforcement.
Instructor: Dr. J. Michael Stallings
Course #V04C
Format: DVD-R with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $918
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
Reinforced Concrete Design: Part 2 - Columns
Focus is on design of reinforced concrete columns using the American Concrete Institute's Building Code Requirements for Structural Concrete 318-05 (ACI 318-05). Fundamentals necessary for understanding and verifying the output of typical design software and design aids are emphasized. Specific topics include: an introduction to strength design, behavior of tied and spirally reinforced columns, construction of axial load and moment interaction diagrams, strength reduction factors, use of interaction diagrams in design, shear resistance, biaxial bending, and an introduction to slenderness effects.
Instructor: Dr. J. Michael Stallings
Course # V04D
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144/ Organization $459
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
The Role of Engineers and Surveyors in Geographic Information Systems
This course should be of interest to those who practice surveying but also those who work in the civil engineering field, including county engineers, city engineers, public works officials, transportation engineers, DOT personnel, federal employees, contractors and consultants.
 
The first part of this course looks at the terminology and definitions of a Geographic Information System (GIS). The process of how to design a system, and how to capture information from both existing records and new spatial data is covered. The course contains a short overview of the most popular software and hardware.
 
The second part of this course deals with the planning, design, implementation and uses of a GIS. The map projection and coordinate systems used to design a system will be identified. Topics addressed include data capture for the base mapping, aerial mapping, digital orthophotos, remote sensing, and GPS equipment. All the latest photo capture equipment such as Light Detection and Ranging (LIDAR) and digital aerial cameras will be described.
 
The third part of the seminar will deal with the National Spatial Reference System/Readjustment of North American Datum (NAD) 83. You can stand on the sidelines or you can get involved in this technology, the choice is yours.

Instructor: Mr. Milton Denny
Course #: V06G
Format: DVD-R with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $918
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
Surveying Course Pre-approval: FL CEP 039-02, 03; KY 05-01-000; TX 277, 278-060
Return to Top of Page | Return to Course List
Shallow Foundations Design Series- Two Parts
This two-part video series consists of Geotechnical Aspects of Shallow Foundation Design and Structural Design of Spread Footings. The series provides a well-rounded review of the design of shallow foundations by addressing the geotechnical and structural issues. The combination of topics is a natural for practicing engineers and has been well received in live seminars for several years. Viewing the set is recommended, but the parts are independent and may be viewed as separate courses.

Part 1 - Geotechnical Aspects of Shallow Foundations Design
Most structures are on shallow foundations. The foundations must withstand the structure's weight without moving. This course explains in straightforward terms the soils aspects of shallow design. Site investigation, soil properties, strength of soils, bearing capacity, and compressibility of soils are examined with the particular points of interest to shall foundations. This course covers the elements of each so the user gains understanding of the importance of each, and how to perform each step.
Instructor: Dr. David J. Elton
Course # V04H
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $459
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 
Part 2: Structural Design of Spread Footing
Design of reinforced concrete spread footings is the focus of this course. Fundamental assumptions for determining the soil pressure distribution under footings are presented along with commonly used formulas. Structural design of footings to comply with Building Code Requirements for Structural Concrete (ACI 318-02 and ACI 318-05) is addressed. Individual topics include: loads, load factors, load combinations, resistance factors, materials, flexure, shear, reinforcement details, development length, and embedment reinforcement. Brief comparisons are made to illustrate the primary differences between footing design by ACI 318-02 and the previous version ACI 318-99. Changes in course content due to the 2005 revisions to ACI 318 were minor and are addressed with a course revision sheet.
Instructor: Dr. J. Michael Stallings
Course # V04J
Format: DVD-R with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $459
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
Soil Basics for Engineers 

This course acquaints you with the basics of how soil behaves and how it is used in design and construction. Application is emphasized over theory. The course is intended for those who must interface with soils engineers, but may not be doing the engineering. The course will teach how soils are identified, classified and tested. Fundamentals of earthwork practices for walls, foundations and fills are covered, focusing on situations that can cause trouble. Basic ways to improve bad soils are covered. Problems caused by water are covered in all areas. This course will teach you how to talk to soils engineers by covering the basic terms and practices of soils engineering.

This course is suitable for engineers, municipal officials, architects, inspectors, sales engineers, lab managers, building officials, and contractors.

Instructor: Dr. David J. Elton
Course # V00G
Format: DVD-R with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $879
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
Soils for Pavements 
A New Course for Engineers and Designers
This practical course describes each important element of the soils aspects of road engineering for paved and unpaved roads. Topics: What causes problems, the soil inputs to pavement designs, soil exploration for roads, soil stabilization, construction with soils, incl. QC/QA, fixes for soil-related pavement problems and more. This course will give you a working knowledge of soil behavior, and the basics of geotechnical engineering for design of roads and pavements. What types of soils work best, which to avoid, and how to read soil reports are covered. The course prepares you to continue your own study of soil characteristics and parameters necessary for design in accordance with AASHTO and NCHRP guidelines. This course is useful for engineers, technicians, managers, public works professionals, and those who perform or review pavement designs. It is very practical. If it's been awhile since you've attended a soils or foundation course, or if you're need a refresher or update, this practical course is for you. .
 
Instructor: Dr. David J. Elton
Course # V06H
Format: DVD-R with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $918
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Stories From The Field: What Engineers Need To Know About Construction
This is an actual case study done with a panel of professional project engineers, owners and construction engineers with Brasfield & Gorrie, Uzun & Case, and Collins Project Management. While the education of an engineer is heavily laden with mathematical theories and theoretical perspectives, this course deal with the practical matters of practicing engineers. The panel addresses every day problems of contractors, owners, and field engineers. This looks at pertinent jobsite issues that have caused problems between the engineer and the constructor.
Instructors: Mr. Michael Hein and Mr. Steven Williams
Course # V02A
Format: DVD-R with supporting print materials or CD-ROM
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $459
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Storm Water Drainage System Design
Highway, construction and municipal engineers, site developers and planners will be particularly interested in learning methods for calculating and designing to accommodate storm water runoff. The Rational Method is used for the class examples. The basics of storm water pipe design are discussed. Rules of thumb needed to properly design storm water pipe are presented. The Manning equation is presented for determining the Q vs. diameter relationship for the full flow condition, and partial flow diagrams are utilized for conditions of flow other than full.
Instructor: Dr. S. Rod Jenkins
Course # V96B
Format: DVD-R  with supporting print materials
Length: 3 hours (0.3 CEUs or 3 PDHs or 3 CPCs)
Fee: Individual $144 / Organization $369
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Unpaved Low Volume Road Design, Construction, and Maintenance
This course gives training in all aspects of unpaved roads. Construction procedures, maintenance, erosion control, choice of soils, stream crossings, surface treatments, and more. Emphasis is on cost-effective design and construction. Very practical course. The course is for State DoTs, County Engineers, US/State Forest Service, US/State Parks departments, timber/mining industry engineers, professional engineers, consultants, and contractors.
Instructor: Dr. David J. Elton, P.E. and Gordon Keller, P.E., G.E.
Course # V04K
Format: DVD-R with supporting print materials
Length: 9 hours (0.9 CEUs or 9 PDHs or 9 CPCs)
Fee: Individual $432 / Organization $1,377 
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.
 Design of Structural Steel Members Using LRFD
Fundamentals of design of structural steel members using the American Institute of Steel Construction's Load and Resistance Factor Design (LRFD) Specification for Structural Steel Buildings (1999) are covered. The course emphasizes a limit states view of the design process. An explanation of the common failure modes, or limit states, for which members must be designed and how the LRFD Specification addresses these limit states is the focus of the course. Analysis and design examples are used to illustrate the concepts. A fundamental background in structural analysis and design is assumed. This course is excellent for engineers seeking a review of the basic principles of steel design and for experienced structural designers who have not started using the LRFD Specification in daily practice. Specific topics covered include the design of tension members, compression members, and beams.
Instructor: Dr. J. Michael Stallings
Course # V04B
Format: DVD-R with supporting print materials
Length: 6 hours (0.6 CEUs or 6 PDHs or 6 CPCs)
Fee: Individual $288 / Organization $918
Shipping / Handling: $10.00 per course; For all Rush or International Orders, call 1-800-446-0382, Additional shipping and handling fees apply to these orders.